PDF Doll Patterns 16 and 12 inch dolls
All Patterns Shown Are For 16 or 12 inch dolls, unless otherwise state, THE NAMES AND INFO WILL BE UNDERNEATH THE PATTERN PICTURES
Please Read all the following instructions on ordering these patterns. You can scroll down this page for the pictures, choose the pattern, make your list and email me, after I confirm I will send you the PDF files. I accept family and friends paypal only to email@example.com Thank you and I hope to hear from you soon.
FOR INFORMATION ON HOW TO DOWNlOAD AND PRINT THE FILES, PLEASE REFER TO THE SIDE MENU OF THE MAIN BLOG PAGE, CLICK “SEWING TUTORIALS” THANKS
ALL PATTERNS EITHER 12 OR 16 INCH FASHION DOLLS, PLEASE SPECIFY WHICH SIZE PATTERN YOU WOULD LIKE IN YOUR EMAIL thanks
Patterns recommended for experienced seamstress, no seam allowances and limited instructions but the fit is good and can be lined using simple lining techniques etc.
It would be good to contact me first with your order so I can be on hand.
Please refer to my blog for finished garment pictures and email me with any questions. Thank you.
Skirt and top with pleats 16 inch only
Shaped Bodice Dress 12 inch only
Wrap Around Skirt 12 inch only
Chanel Style Jacket 12 inch only.
Hooded Jacket with Belt
Double Breasted Wing Jacket
Capes are in 12 inch size only.
Notched Collar Cape
Tab Collar Cape
Shaped Hem Cape
This new style pattern added to m catalogue under tops features a blouse with pleated detail on the front ending with a flaring hemline collar and short sleeves. A perfect fit with no alteration and can be either a blouse or a jacket, my version is fully lined and finished with hook and look front closure
Gathered Shoulder top
Ruched Front Skirt
Ruched Front Top
Slash Sleeve Tunic
Angled Hem Tunic
Cutaway Sheath This new pdf pattern features a cutaway sheath dress that is easy to make with loads of interchangeable options. In my version I added a mesh overlay and wide border hem. the dress is fully lined and I also added a bias collar to finish the neckline and added a bow to finish. There are bust and waist darts in front and waist darts in back for the perfect fit, I added a back extension to place snaps so the close would look seamless. The original pattern shows a beaded style neckline but the simplicity of the pattern allows room for imagination and finishings, fabric choices etc…I have made this in a Pucci style fabric in the past and to fit to Poppy, I have reduced the pattern by 10% before I printed it out. The pattern is sized for 12 or 16 inch dolls and can be found under dress on my PDF pattern pages.
This Yoke Skirt pattern for 12 or 16 inch dolls, features a yoke band and pleated bottom section with a back closure, the band sits at the natural hip line and there are two darts in the back of the yoke. For my version I choose to adjust the yoke to fit Poppy`s smaller waistline, I self lined this section, I lined the bottom pleated part with light weight china silk. repositioned the pleats as I was replicating a similar skirt, attached them together and finished with a snap back closure.
This top features an empire bra bodice construction with flaring bottom skirt and pleated front drape. My version is fully lined with gold-tone chain straps and button and loop back closure. You can find this under tops in my PDF Pattern selections.
This easy to make fabulous shift dress has panel inset construction details and front and back yoke bodice. My version is fully lined with button over snap back closure and this style would be great for coloring blocking etc…Look under dresses for this new shift style pattern for 12 or 16 inch doll. Thanks
Panel Inset Dress
This fresh set uses two new patterns, the top is a wrap style with keyhole design, my version is done in a fine knit and I chose a rhinestone buckle with hook closure and self tie over loop and buttons side closure.
The skirt is a wrap front style with shaped edges, two button accent, waistband and button over snap back closure. Both patterns fit great, easy to make and can be found under tops and bottoms on my PDF pattern pages.
Wrap keyhole top
Midi Wrap Skirt
This set features two new patterns, a knit top with long sleeves and shaped neckline accented with a gold-tone chain and a midi length skirt with basque construction details and waistband. Both patterns are a great fit, easy to make and can be found under tops and bottoms on my PDF Pattern pages.
Shaped Neck Top
Midi Basque Skirt
Blue Iris features the gathered dress pattern, my version uses a crinkle fine knit and I have chosen to close only the midriff at the right side with snaps for easy dressing. I have added a self belt to tie at the waistline and a bias tie belt for the bodice gathers and straps. This pattern can be found under dresses in my PDF pattern section and it comes in 12 or 16 inch sizes.
Another new skirt style for my PDF pattern page, a fitted pencil skirt with basque styling and notched V front inset. This style is an excellent fit and I have chosen to edit out the back inset to make it easier to line and place the closer at center back. The skirts you will see me post are a great guide for sewing unique style in miniature, but do require some editing if you prefer to fully lined them. The pattern offers pieces to half line depending on your preference.
Notched Basque Skirt
Two new skirt styles can be found under bottoms on my pattern pages. The first one is a pencil skirt with basque styling and soft front drape detail. The second skirt is a body con style featuring front and back yoke, triangle side insets and top stitching details. I have edited out the waistband on the basque style, I added an inch of hemline to each one, the overall fit is excellent, you may need to just shave down the top waist areas to accommodate the tiny silkstones. I like to do this to the pattern before hand, taking the front and back pieces or side front and side back pieces, and shave off a bit as you come up to the waistline to get a good fit as the skirt comes up over the hip into the waistline. By doing it before hand then adding your seam allowances, you don`t alter the proper fit of the skirt and the over all result is much better.
Basque Draped skirt
The Corset has an outer drape for those who like a challenge but the overall pattern sections can be used for a lined fitted corset with either a laced up back or snap closure depending on your preference and includes instructions.
The Balloon skirt has 8 file pages consisting of two layers of pieces to create the full balloon effect.
NOTE: I recommend sewing experience for these patterns and at this time offer them for 12 inch size dolls only. Please find these under tops and bottoms on my PDF pattern pages.
Corset 5.00 us includes instructions
This ensemble features a new style pattern for a cropped jacket with ruffling detail at the sleeve and bottom hemlines. Easy to make and needs no alteration for fitting. The fabric shown can be found in my Etsy store and the pattern can be found under jackets in my PDF pattern pages.
Pretty formal wear using a new pattern called Gathered Dress on my PDF pattern page under dresses. I have used the bodice and midriff sections and the Pleated skirt (found under bottoms) and made it a knee length skirt instead of the intended full skirt. This pattern needs to be adjusted to fit the Silkstone or FR waistline and I opted for a back closure instead of side closure. A basic easy pattern that can be lined or unlined and modified and embellished to create many appealing styles.
The pattern features a step-in-to ankle length gown with halter style bodice gathered into a midriff placket and straight skirt with front and back dart control. My version is a fine jersey knit for a better drape, I altered the back side edges to fit the Silkstone and Victoire Roux perfectly, chose an S Hook to close the back neck strap and opted for a closed side seam instead of the thigh split. You could adjust the lengths for maxi, midi or use the bodice section with other skirt style, loads of possibilities.
Maxi Halter Gown
This new pattern features a sleek figure hugging ankle length gown with scoop front neckline, plunging back neckline and cascading back drape from the shoulders. Easy to make with a step-in-to construction for dolls (gown shows a back zipper) and calls for a fine knit that hugs the body and drapes well fitting all the various 12 or 16 inch body types with little or no adjustments. It could be made short or long, or even with a back train, side or back slit etc…My version is cut from an off white jacquard knit, slightly heavier than the fine modal jersey and not quite as stretchy, lending more body to the garment for a better overall result.
Draped Back Gown
A uniquely style knit top cut from pastel pink fine jersey and features a ruched collar, asymmetrical hem and button and loop front closure.
A challenge but worth it, this design fits perfect for the larger scale and my version has edited out the gathered front with laces and I choose to liquid seam my hems but sew my seams. I hand tacked the ruched collar at the shoulders and used shank buttons and loops to close the front.
I have made this knit top in 12 inch scale with slight editing as well and it worked up great.
This top and pattern are posted to Etsy but the pattern on its own is available under tops on my PDF Pattern page. Thanks
Ruched Knit top
This blouse is constructed using a new pattern that can be found on my PDF Pattern Page and features a corset style empire bodice with gathered bustline, shaped front placket and facing, stand up collar and sleeves with cuffs. The fit for 16 inch dolls requires no alteration and my version is lined in china silk and finished with a snap front closure. This is a little more of a challenge at the 12 inch scale, but can be done with patience and precise cutting and sewing. I think this works great as a blouse, could be done unlined with finished seams or not, and also a heavier fabric for a jacket style as well. I love the translation of most of the blouse patterns into jackets, and by cutting the front on the fold and opening the back, you get a totally different look.
The skirt is also found on my pattern page and it is a perfect fit at this scale with a dropped waistline and my version is lined, has a back closure instead of a side, I have left off the bottom band that shows with the pattern and closed the back with a snap. The pattern shows a lace finish on the front edge which would look amazing too.
Both patterns are a great look for either size doll and this outfit can be purchased along with the patterns for each piece on my Etsy page. Thanks
Lace Trim Blouse
This skirt pattern is modern and easy to make with only slight adjustments, making it a versatile pattern for creating many styles. It has a side closure, bottom band, front pleats and sits at the hip for belly button dolls etc…I have changed it a bit to work better for the Silkstone doll body.
My version of the skirt has a back closure instead of a side closure, I have left off the bottom band and closed the front pleats so it sits at the waist instead of the hip as shown in the artist rendering.
The blouse is constructed using the Fitted Blouse pattern found on my PDF pattern page and it shows for either a knit or a woven, the sizing is perfect, and depending on your choice of front closure you would adjust that for each doll.
Both patterns are an excellent guide to creating these similar looks but I recommend at least some sewing experience for the best result and they can be found on my PDF Pattern page.
This is a new pattern posted to my PDF Pattern page. The dress has a notched center seam bodice with cap sleeves, gathered into a waistband and A line skirt. This style needed very little adjustment to fit Silkstone Barbie, with the exception of extending the back edges to accommodate a snap closing instead of a zipper and adding a 1/2 inch hem allowance for the skirt and 1/4 inch seam allowances for everything else. I also edited out the back walking split on the skirt. I recommend using a cotton fabric to try and to line use the exact pieces cut from lining and a sheath dress lining technique construction.
Dress with Waistband
Three easy to make dress style, orange sari, eggplant tubedress, pink biasbelteddress $8.00 for three 12 inch size only. These versions are fully lined and I altered the ties on orange sari and instead of twisting pink belted added a gold ring. I left the facing off of the eggplant and used a bias cut neck tie.
This dress is easy to make, I will show it made up shortly, but I have made it up a few years back and it works great. Knits work best, skimp on your seam allowance for the stretch, but woven fabrics will worn up fine too.
Blouse with cuff ties
This jacket is actually a blouse with cuff ties, it is easy to make, has a nice collar and neckline as well as a nice dart placement to nip in the waist but flares at the hemline for full skirts or pants etc…
Empire Duster pattern
This duster is easy to make and features an empire style waistline and double breasted front. My version is fully lined and I have used a three-quarter length on part sleeve and excluded the pockets below the empire waistline.
This pattern starts as a blouse and features a center front seam and shaped neckline. My version is made into a jacket, fully lined and shows a front closure using button and loop and sleeve cuffs. This style is a good fit for Silkstone and Poppy Parker, add a little extra to the front edges for FR dolls.
Zipper front blouse
Pin tunk blouse
This patterns starts as a pink tuck blouse with three-quarter length sleeves and flaring cuffs. My version has a center front seams turning it into a nice jacket and I lined it as well. I put a contrasting fabric to face the sleeve cuffs and used button and loops to close the front. A great fit for all style dolls.
Bolero with collar and Lemongrass bolero
This ensemble features a new style bolero with collar and three-quarter length sleeves. A little harder to make than the Lemongrass bolero, but similar, as you have to sew the collar on, but I like the fit and it can be lined easy as well. I will include both the Lemongrass and bolero with collar for 5.00us.
A set of three purse patterns, in two sizes, Silkstone/FR and FR:16/Tonner.
These are descaled real purse patterns and come with instructions, intermediate challenge, but they have loads of possibilities. The pattern shows lining pieces and with a little imagination the possible finished results would be limitless. These sizes could be interchangeable for both dolls, depending on whether you want the trendy larger bags or a regular size bag for you finished look.
My versions are made up using the smaller size patterns in ultrasuede and cotton fabrics, with nice linings, some prints, some plain. I opted for chain hardware and handles on one of them and using jump rings and end crimps fastened the handles etc…
diamond back sundress
The pattern for this dress is easy to make and it fits perfect with no alteration. My version is done in a fine knit and I have closed the front seam choosing to cut it on the fold, the pattern shows a front opening that would be great for a beach cover up etc…I used silk ribbon for the ties. A wonderful trendy style for FR and this pattern can be found on my pattern page
draped front sheath
This unique sheath has a sleeveless empire bodice, a front drape panel, is easy to make and line and fits with little or no alteration. My version has a dressmakers bow added to the front bustline, a placket on one side at the back for snaps and slimmed the bottom of the skirt from the original pattern.
jacket with gathered collar
This unique jacket fits all dolls perfect, easy to make and line. I used a ribbon for the drawstring, but any fine cord or lace would work. Front closes withe come together edges and I used a shank button and loop for this one.
Gather empire sheath only,
This romantic style sheath has a gather empire bodice, easy to make up and fit the dolls without alteration, although for my version I shortened the length by about 1/2″ and added a placket to one side of the back for snap closing giving it a sleeker look. A zipper would work great as well.
pencil skirt with pockets
This spectacular suit was cut from flamingo silk/cotton Kaufman fabric found in my Etsy store and using the Blade jacket pattern and a new pencil skirt with pockets pattern found on my Pattern page. This suit is great to make, I use a different sleeve and cut the side fronts and backs smaller for a closer fit, everything else works up fine.
The skirt is perfect fit, I left out the kick pleat at the back and the waistband for this look. The pattern comes with a waistband and When lining, remember to cut the front lining wider where the pocket would normally be, (the pocket is used only with the main front fabric) I use the back side edge as a guide.
Pretty Sweet dress
I used a very fine fabric and fully lined this amazing dress, it is a perfect fit, I put a placket at the back on one side for the closure snaps, but a zipper would finish it nicely as well. Lining is relatively easy with experience. This pattern includes facing for the front and back bodice as well.
This style use the In the City top and the Audacious skit. By adding a waistband to the skirt pattern it becomes a nice side gathered skirt. Instead of using a grommet to put the tie through for closing on the top, I used buttons and loops and used the tie as a belt. You can find these two patterns by scrolling down and for more pictures please click on my Etsy shop in the header.
This blouse will fit Poppy Parker and Silkstone, cut front edge wider for FR dolls. The hood has darts just at the shoulder, exclude these, human size they work, but at this scale they are tiny and don’t have an impact on the result. The pattern works up great, fairly easy and lining it seems to be the best look for the finished garment.
A Line Dress
Pretty Sweet dress
Bali Bamboo dress
Summer Set dress